East-coast-supercharging ECS Trans Strut Brace Instrukcja Użytkownika

Phone: 609-752-0321Fax: 609-752-0320562 Route 539Cream Ridge, NJ 08514EAST COAST SUPERCHARGINGECS Transmission / Rear End Brace C5V1Kit contents:(1) L

Installation Instructions:1. Unpack and check contents of the brace kit.2. Remove vibration dampner from the differential.3. Remove and discard left s

5. Install the left side differential plate using the supplied 8mm x 40mm bolts and lock washers. Torque the bolts to 25 ft lbs.6. Remove and dis-card

11.Install the left side trans-mission bracket with the supplied 10mm x 55mm bolts and torque to 45 ft. lbs. (fig. 4)12.Remove lower 2 right side tran

21.Install the 2 supplied 3/8 24 x 1 ½” bolts into the top front holes in each differen-tial bracket. Be sure the bolts face in to-wards the center of

28.Install the 3/8 lock nuts onto the rear lower rod end bolts. Tighten all four bolts holding the lower strut rods.29.Install the differential cross